The SIG-Sauer P-250 not only features changeable grips, it also offers interchangeable frame sizes, grip configurations, slide assemblies, barrel lengths and calibers. Photo courtesy Sig-Sauer
FEATURED IN TACTICS AND WEAPONS
I m an outspoken advocate of diversity in law enforcement. While some would like every American police officer to be a 6'-tall, lean male, some of the best officers I ve served with are small males and females who have a gut-level desire to serve their community. In fact, I d take a highly driven, small female over a large but ambivalent male any day of the week.
However, having a wide array of officers does create a real challenge equipping them with the right gear, particularly the duty sidearm. Although semiautos make this a bit easier than the revolver, they re still a long way from optimum. While it s easy to say, Just let the officers carry what they want, this isn t always feasible in every department because of local issues and politics. In addition, many agencies have a strong desire to select a particular gun for all personnel for standardization purposes. Whatever the reason, finding a single handgun to fit wide range of hand sizes poses a real problem for many agencies.
The P-250
Several gun manufacturers attempt to address this issue by offering semi-auto pistols with interchangeable back straps on the grip. The German firm Heckler and Koch actually offers its new pistol, the P-30, with a grip in which the front, side and rear panels all can be changed. This offers as close to a true custom grip from a factory-produced firearm as you can get.
The most recent of the new service sidearms for the law enforcement community is the SIG-SAUER P-250. This gun not only features changeable grips, it also offers interchangeable frame sizes, grip configurations, slide assemblies, barrel lengths and calibers. SIG-SAUER offers a gun that not only can be sized to fit an individual officer, but also to fit the officer s mission. You can set it up for uniform patrol, SWAT, plainclothes/off-duty or deep-cover ops in just a few moments.
Trigger Action
The entire weapon platform is based around the trigger assembly, also called a receiver or chassis. The trigger assembly contains the weapon s serial number, which is displayed through a slot cut into each frame. This assembly inserts into the frame and is held in place by the takedown lever and a notch molded into the rear of the frame at the grip tang. It takes just a few seconds to field strip the gun and remove the receiver. This assembly is available in both a standard length and, for those with small hands or short fingers, a short-reach trigger.
The trigger action is a true double-action only (DAO), which requires the same long, consistent manipulation for each press and release, which both cocks and releases the hammer. The P-250 isn t a striker-fired weapon, but hammer-fired, which many authorities feel is a more reliable ignition system. Some won t like this as it slows your ability to shoot quickly. However, SIG-SAUER Academy Director George Harris believes this DAO trigger action may be a blessing in disguise for the typical police officer.
Many officers try to shoot faster than their ability to do so, Harris told me in a recent phone call. Of course this results in misses at a time when they might not be able to afford a miss. A longer trigger action will require an officer to slow down and concentrate on their shooting, which in the end will result in more hits. Any trigger action can be dealt with via proper training and the SIG P-250 is no different. True enough!
While I admit I don t like long triggers, the one on my test P-250 was quite smooth, making trigger control easier to accomplish. It took me about 50 rounds before I stopped my tendency to short stroke the follow up trigger action. However, once I got the hang of it, I was able to string together shot-to-shot times, with accurate hits, in the .25- to .28-second time frame. No, my time won t win any competitions, but this gun isn t intended for that. The SIG P-250 is a service pistol for moderately trained law enforcement officers and military personnel for close-quarter defense. In that regard, the P-250 will serve quite well.
Frame Fits for All
The varied P-250 frame sizes are best called full, compact and subcompact with proportionate slide and barrel lengths. My test gun was the P-250 C model, which is the mid-size or compact version. The first thing I noticed when I took the P-250 from its box was that the slightly curved back strap grip fit my small hands quite well. This isn t surprising SIG put a great deal of research into the grip configuration.
The company surveyed nearly 30,000 people to obtain a sense of what shape grip would give the P-250 its best pointing characteristics. The final production frame(s) possess traits the company found via this research. The C (compact) grip is long enough that my pinky finger doesn t hang off the bottom while my trigger finger rests squarely on the trigger just forward of the first knuckle. That said, I would opt for the short trigger assembly.
The gun is a pleasant-looking two-tone with a brushed stainless-steel slide on top of a black polymer-like frame. The frame is made of a secret proprietary material SIG claims isn t a polymer like other companies use. The slide actually rides on steel rails, which are part of the trigger chassis, not the composite-material frame. The frame is quite strong and should offer a long service life.
The bottom of the grip frame has half-moon indentations on each side. This is more important than many officers realize. These indentations permit a shooter to rip the magazine from the gun without locking the slide open in the event of the dreaded double-feed malfunction. Just push the magazine-release button, grasp the bottom of the magazine and pull. Once this is accomplished, work the slide to eject any garbage from the chamber, simplifying what may be a complex problem in the middle of a fight. The frame s dust cover, like that on many modern pistols, features a molded picatinny rail for adding lights and lasers to the gun, freeing an officer s support hand to help shoot.
Extra Features
Many law enforcement administrators and shooters will appreciate that the P-250 is completely ambidextrous. Slide-lock levers on both sides of the trigger assembly extend out and over each side of the frame. The magazine-release button switches to either the right or left side in just a few seconds, making it available to either the thumb or index finger of either hand, depending on which method the shooter uses.
The test gun came equipped with SIG-Lite night sights securely dovetailed into the slide. These sights are quite bright and highly visible in both daylight and low-light environments. The sights come in variable heights to fit an individual shooter s point of aim/point of impact.
My test gun was a 9mm, but the P-250 also is offered in .40 Smith & Wesson and .357 SIG. Is it possible to have a subcompact in 9mm and a full-size gun in .357 SIG? You bet! The slide and barrel will fit the frame assemblies and magazines for each caliber. The only difference will be the soon-to-be-introduced P-250 in .45 ACP, which won t interchange with the others.
Test Results
I tested the SIG P-250 using a number of 9mm loads proven to work on the street in actual police shootings. I tested these loads off-hand at 50 feet by firing five-round groups in a semi-slow fire mode (for example, as fast as I could reset the trigger and get the sights on the desired point of aim, keeping George Harris admonition in mind). Each load was tested for velocity by firing five rounds across the screen of a Shooting Chrony chronograph located 15 feet from the gun s muzzle and averaging them. The results:
Corbon 115-grain DPX hollow point +P: 3 group, 1,257 fps
Remington 115-grain jacket hollow point: 3.5 group, 1,167 fps
Speer/ CCI 124-grain Gold Dot Hp +P: 2.25 group, 1,238 fps
Winchester 127-grain SXT HP +P+: 2.25 group, 1,277 fps
I then spent an afternoon shooting several hundred rounds of various full-metal jacket and hollow-point loads through the P-250 with only a few minor problems. First, the single magazine supplied with the test gun would not take its full complement of 15 rounds. After loading the magazine several times, this problem went away.
Second, in the test s beginning, the gun had difficulty chambering several of the hollow-point loads. But like the magazine, this problem went away after a few rounds were fired. To be fair, this isn t an unusual problem with many semiauto pistols. It s always a good idea to shoot enough rounds through the gun to ensure it will function flawlessly with the type or style of ammo you carry.
In the end, the SIG P-250 is a reliable duty-grade pistol, which will go a long way toward satisfying the needs of a large number of law enforcement agencies around the world.
The Specs
Caliber: 9mm, .40 S&W, .357 SIG
Barrel length: 3.86 inches
Gun length: 7.2 inches
Width: 1.38 inches
Height: 5.12 inches
Weight: 30.9 oz.
Action: Hammer-fired DAO
Price: $699
SIG-SAUER
18 Industrial Drive
Exeter, NH 03833
603/772-2302
